Seismic G5 30-Degree Spring Truck
10" Hollow Axle - 1 Truck
Seismic® G5™ 30-degree Spring Truck
180mm faced Hanger with 30-degree Baseplate in stone finish.
Choice of Solid or Hollow axles, Springs in four (4) strength options.
Price is for a single truck. Order two (2) trucks for one skateboard.
General setup suggestions
For optimal traction, power, and control, we usually suggest a 30-degree truck at the tail and a 45-degree truck at the nose, with stiffer springs at the tail than at the nose. Use two 45-degree trucks on symmetrical (twin-tip) freeride decks. Use stiffer springs if you’re heavier and/or taller than average, softer springs if you’re lighter and/or less tall.
The original precision longboard truck – five generations later!
A major upgrade to our flagship high-rebound truck technology.
Power, stability, maneuverability, and control since 1993
No truck has more energy return, more precision, or better steering control. The world’s best for pumping!
Stronger, lighter, and better-looking
Our crack team of engineers and industrial designers scoured every cubic millimeter of the previous (G4) model – looking for material to trim and spots to toughen, all while improving aesthetics.
More precise Spring System
Breakthrough Spring Cap design keeps Springs much straighter as they compress – resulting in a larger turning range and enhanced steering control.
Easier maintenance and better Pivot Bolt fastening
Thicker, stronger Pivot Bolt is easier to remove and install, and it threads more securely into a larger Baseplate Locknut. Stronger, reusable Pivot Bolt Clip is easy to remove and install by hand, and it’s fastened to a rubber “leash” that prevents it from ever getting lost. Ingenious new multi-part Baseplate structure creates uniform thickness at mounting corners, so you need mounting bolts of only one length.
Most components backwards compatible with older models
Exception: G5 Pivot Bolts, Baseplate Locknuts, and Pivot Bolt Clips will not fit older (G4) baseplates; and older (G4) Pivot Bolts, Baseplate Locknuts, and Pivot Bolt Clips will not fit G5 Baseplates.